Snaps 14 mm.

Unit Price for 1 pcs. Price from 3,69 €

Unit Price for 10 pcs. Price from 3,32 € 3,69 € Unit Price for 100 pcs. Price from 2,95 € 3,69 € Unit Price for 1000 pcs. Price from 2,58 € 3,69 €

The size indicated is the diameter of the press fastener’s head.

Facts
•    Available in different colours. See them under variants.
•    Size: 14 mm
•    Material: Iron with surface treatment
•    Nickel free

Application
• Suitable as, among other things, closing mechanisms on bags, wallets, bracelets and clothing.

To install press fasteners, use either a hand stamp or a tool for a slewing machine/manual press. Please note that the 6S Snap Button requires a specific tool and cannot be used with tools for standard snap buttons.

Read instructions for using and installing press fasteners here.

Do you have questions?
Get personal help
Snaps 14 mm.
Items
 
Price
Note
Quantity
  • Brass,100 pcs.

    Colour: BrassOne unit is: 100 pcs.

    Model/Product no.: 4940036010

    19,17 €

    Unit Price for 10 pcs. 17,25 € 19,17 € Unit Price for 100 pcs. 15,34 € 19,17 € Unit Price for 1000 pcs. 13,42 € 19,17 €

    Sold out

    Not in stock

  • Nickel,10 pcs.

    Colour: NickelOne unit is: 10 pcs.

    Model/Product no.: 4940031001

    4,62 €

    Unit Price for 10 pcs. 4,16 € 4,62 € Unit Price for 100 pcs. 3,70 € 4,62 € Unit Price for 1000 pcs. 3,24 € 4,62 €

    57 pcs. in stock

  • Gun metal,10 pcs.

    Colour: Gun metalOne unit is: 10 pcs.

    Model/Product no.: 4940031040

    3,69 €

    Unit Price for 10 pcs. 3,32 € 3,69 € Unit Price for 100 pcs. 2,95 € 3,69 € Unit Price for 1000 pcs. 2,58 € 3,69 €

    125 pcs. in stock

  • Purple,10 pcs.

    Colour: PurpleOne unit is: 10 pcs.

    Model/Product no.: 4940031046

    3,69 €

    Unit Price for 10 pcs. 3,32 € 3,69 € Unit Price for 100 pcs. 2,95 € 3,69 € Unit Price for 1000 pcs. 2,58 € 3,69 €

    115 pcs. in stock

  • Red,10 pcs.

    Colour: RedOne unit is: 10 pcs.

    Model/Product no.: 4940031050

    3,69 €

    Unit Price for 10 pcs. 3,32 € 3,69 € Unit Price for 100 pcs. 2,95 € 3,69 € Unit Price for 1000 pcs. 2,58 € 3,69 €

    56 pcs. in stock

  • Green,10 pcs.

    Colour: GreenOne unit is: 10 pcs.

    Model/Product no.: 4940031090

    3,69 €

    Unit Price for 10 pcs. 3,32 € 3,69 € Unit Price for 100 pcs. 2,95 € 3,69 € Unit Price for 1000 pcs. 2,58 € 3,69 €

    35 pcs. in stock

  • Winered,10 pcs.

    Colour: WineredOne unit is: 10 pcs.

    Model/Product no.: 4940031098

    3,69 €

    Unit Price for 10 pcs. 3,32 € 3,69 € Unit Price for 100 pcs. 2,95 € 3,69 € Unit Price for 1000 pcs. 2,58 € 3,69 €

    9 pcs. in stock

  • Nickel,100 pcs.

    Colour: NickelOne unit is: 100 pcs.

    Model/Product no.: 4940036001

    19,17 €

    Unit Price for 10 pcs. 17,25 € 19,17 € Unit Price for 100 pcs. 15,34 € 19,17 € Unit Price for 1000 pcs. 13,42 € 19,17 €

    74 pcs. in stock

  • Purple,100 pcs.

    Colour: PurpleOne unit is: 100 pcs.

    Model/Product no.: 4940036046

    19,17 €

    Unit Price for 10 pcs. 17,25 € 19,17 € Unit Price for 100 pcs. 15,34 € 19,17 € Unit Price for 1000 pcs. 13,42 € 19,17 €

    14 pcs. in stock

  • Red,100 pcs.

    Colour: RedOne unit is: 100 pcs.

    Model/Product no.: 4940036050

    19,17 €

    Unit Price for 10 pcs. 17,25 € 19,17 € Unit Price for 100 pcs. 15,34 € 19,17 € Unit Price for 1000 pcs. 13,42 € 19,17 €

    22 pcs. in stock

  • Green,100 pcs.

    Colour: GreenOne unit is: 100 pcs.

    Model/Product no.: 4940036090

    19,17 €

    Unit Price for 10 pcs. 17,25 € 19,17 € Unit Price for 100 pcs. 15,34 € 19,17 € Unit Price for 1000 pcs. 13,42 € 19,17 €

    28 pcs. in stock

  • Winered,100 pcs.

    Colour: WineredOne unit is: 100 pcs.

    Model/Product no.: 4940036098

    19,17 €

    Unit Price for 10 pcs. 17,25 € 19,17 € Unit Price for 100 pcs. 15,34 € 19,17 € Unit Price for 1000 pcs. 13,42 € 19,17 €

    28 pcs. in stock

Category: Accessories

Items
Price
Note
Quantity

Related products

Snaps

Press fasteners/snaps are used as a closure mechanism on, for example, bags, purses and clothing. A press fastener consists of four parts, two parts for the upper part and two parts for the lower part. The size of the press fasteners is listed in millimeters and refer to the diameter of the press fastener’s head. We have four types of press fasteners in our range. Ordinary press fasteners, press fasteners 6S, auto press fasteners and auto-baby press fastener. There is a separate insertion tool for all four types of press fasteners. When you have chosen the size and type of press fastener you want, there will on the product page be provided a link to the correct tool.

 

Important!

Always make a test on a remnant of the material you are going to drive the press fastener into.

 

Tool for mounting all four types of press fasteners

When you install press fasteners, it is most optimal to use a slewing machine or a manual press with corresponding tool for the size and type of press fastener you have chosen. With

the slewing machine or the manual press, you ensure a hard and straight vertical pressure on the press fastener. But less can do it if you don't have access to one of the two machines.

For the different sizes and types of press fasteners, you can buy corresponding hand stamps.

 

If you want to hammer in the press fasteners with a hand stamp, you will need a hammer. And that is important to use a hard and stable surface, such as a garden tile, a chopping board or something else with a hard surface that does not move. If you work at a regular table, you must position yourself so that you hammer the press fastener just above the table leg, so that the tabletop does not bend. If you hammer in press fasteners in the middle of a table that bends when you hit it, it is impossible to get the push button to sit straight and properly.

 

Installation of press fasteners and press fasteners 6S

Before mounting the press fastener, you must make two holes. One for the two top parts and one for the two bottom parts. Make the holes either with a tong or a chisel.

 

The bottom part

The hole for the bottom part must be of a size so that the part with the “stick” can be easily inserted. - approx. 3 mm in diameter.

 

The upper part

The size of the hole for the upper part must be so large that the collar on the bottom part can

fit in the hole - approx. 5 mm in diameter. If the leather is much thicker than 2.2 mm, it is necessary to either make a larger hole, or skive the leather around the hole on the back – that is, remove a little leather around the hole to make the leather thinner and thus make it possible to fit the press fastener. Use a French skiver for skiving the leather around the hole.

 

Installation of auto press fasteners and “auto-baby” press fasteners.

The procedure is the same as on press fasteners and press fasteners 6S.

Customers who bought this product also bought

Snaps

Press fasteners/snaps are used as a closure mechanism on, for example, bags, purses and clothing. A press fastener consists of four parts, two parts for the upper part and two parts for the lower part. The size of the press fasteners is listed in millimeters and refer to the diameter of the press fastener’s head. We have four types of press fasteners in our range. Ordinary press fasteners, press fasteners 6S, auto press fasteners and auto-baby press fastener. There is a separate insertion tool for all four types of press fasteners. When you have chosen the size and type of press fastener you want, there will on the product page be provided a link to the correct tool.

 

Important!

Always make a test on a remnant of the material you are going to drive the press fastener into.

 

Tool for mounting all four types of press fasteners

When you install press fasteners, it is most optimal to use a slewing machine or a manual press with corresponding tool for the size and type of press fastener you have chosen. With

the slewing machine or the manual press, you ensure a hard and straight vertical pressure on the press fastener. But less can do it if you don't have access to one of the two machines.

For the different sizes and types of press fasteners, you can buy corresponding hand stamps.

 

If you want to hammer in the press fasteners with a hand stamp, you will need a hammer. And that is important to use a hard and stable surface, such as a garden tile, a chopping board or something else with a hard surface that does not move. If you work at a regular table, you must position yourself so that you hammer the press fastener just above the table leg, so that the tabletop does not bend. If you hammer in press fasteners in the middle of a table that bends when you hit it, it is impossible to get the push button to sit straight and properly.

 

Installation of press fasteners and press fasteners 6S

Before mounting the press fastener, you must make two holes. One for the two top parts and one for the two bottom parts. Make the holes either with a tong or a chisel.

 

The bottom part

The hole for the bottom part must be of a size so that the part with the “stick” can be easily inserted. - approx. 3 mm in diameter.

 

The upper part

The size of the hole for the upper part must be so large that the collar on the bottom part can

fit in the hole - approx. 5 mm in diameter. If the leather is much thicker than 2.2 mm, it is necessary to either make a larger hole, or skive the leather around the hole on the back – that is, remove a little leather around the hole to make the leather thinner and thus make it possible to fit the press fastener. Use a French skiver for skiving the leather around the hole.

 

Installation of auto press fasteners and “auto-baby” press fasteners.

The procedure is the same as on press fasteners and press fasteners 6S.

Show all reviews
Get inspiration and news

Sign up for our newsletter to receive inspiration, information and much more. You can unsubscribe anytime you'd like.

Lederiet.com by

Læderiet ApS
Bøgekildevej 35  
8361 Hasselager 
Denmark

See our store

Map

Information

Return policy
Return label
Delivery
Order our catalogue
Data sheets
About Lederiet.com
B2B

Customer service

Tel.: +45 86172008
Email: mail@laederiet.dk

Support center

Opening hours

Monday: closed
Tuesday: 10:00 - 16:00
Wednesday: 10:00 - 16:00
Thursday: 10:00 - 16:00
Friday: 10:00 - 16:00
Saturday: 10:00 - 14:00
Sunday: closed
Bank holidays: closed 
Show details

(Customer service hours is from 8:00 o'clock)

Follow us:

Terms and conditions      Privacy policy      Cookies

  • Dankort + VISA/Dankort
  • VISA Electron
  • Mastercard
  • VISA
  • JCB
  • Diners
  • PayPal