Keyhanger in leather

Learn how to make your own keyhanger in leather with this DIY tutorial.

Materials

In this guide, we have used a leather strap measuring 15 mm in width and a swivel clasp that fits this strap width. If you prefer a wider leather strap, simply choose a swivel clasp with a corresponding width.

We have cut the leather strap to a length of 80 cm, making a keyhanger suitable for wearing around your neck with a metal phone tether tab. You can, of course, adjust the length to suit your needs.

When ordering a leather strap from our webshop, it will always be at least 120 cm long.

Please note that the thickness of the leather is important when choosing the correct rivet. If you use thicker or thinner leather than specified in this guide, you may need a different rivet size.

Read more about choosing rivets here.

Materials needed

  • Leather strap: 15 mm wide, 2.0–2.2 mm thick

  • Swivel clasp: No. 46, 15 mm

  • Double cap rivet: 9 × 9 mm

Tools

  • Rivet setter

  • Cutting board

  • Metal ruler

  • Power knife

  • Rotary leather punch

  • Hammer

For finishing

  • Leather grease

  • Optional: Edge beveler and products for edge burnishing

You can find links to the products below the guide.

1. Cut the leather strap

Cut the leather strap to your desired length. We have used a length of 80 cm.

You can place the strap around your neck to check the length before cutting.

 

2. Cut the ends

Cut one end straight and the other at an angle to create a neat finish.

3. Fold the leather strap

Thread the leather strap through the swivel clasp and fold it as shown in the picture.

Make sure that all three layers of leather are neatly aligned and that the ends are positioned as desired.

4. Punch the hole for the rivet

Mark where the rivet should be placed and punch a hole through all three layers of leather.

Use a rotary leather punch set to 3.5 mm.

Punch one layer at a time to prevent the leather from shifting or twisting. Make sure that all three holes are perfectly aligned.

 

5. Set the rivet

Check that the swivel clasp is correctly positioned and that the holes in all three layers of leather are aligned.

Insert the rivet through the holes and set it using a rivet setter and a hammer.

Make sure that the rivet is securely fastened.

6. Finishing

Finish by applying a thin layer of leather grease to care for the leather and help maintain its flexibility.

Your keyhanger is now ready to use.

Tip: Give your keyhanger an extra neat finish

For a more refined finish, you can bevel and burnish the edges before assembling your keyhanger. This gives it a neater and more professional appearance.

  • Edge beveling: Use an edge beveler to round the edges along the entire leather strap. Remember to bevel only from the grain side (the front of the leather).

  • Edge burnishing: Apply a colourless edge finishing product suitable for burnishing and polish the edges with a wood slicker until they are smooth and have a neat finish.

Products for this project

You can buy a package deals with or without tools, or you can buy the products individually. The guide can be downloaded as a PDF file, so that you can print it out.

Materials

Bullsnap nr. 46, 15mm

Double-cap rivet size 9x9 mm

Vegetable-tanned leather strap, 15 mm wide, 2.0–2.2 mm thick
Can be cut to length by our staff

Tools

Rivet setter

Steel ruler

Hi Cutter strong

Punch Tong

Cutting Mat

Leather Conditioner